Brand DHN

Model DM730ST

Projection Technology DLP

Display chip 0.70” DMD XGA

Resolution 1024*768 (4:3) XGA

Light source A new generation of pure solid-state laser light source

Light source life 20000 hours

Brightness uniformity 85% (Typical)

Color uniformity Δ u’v’ ≦0.02

Color standard Rec.709

Scaling ratio

Projection ratio 0.82

Lens displacement Limited range / manual V: 85% - 95% H: 95% - 105%

Screen size 30”~300 ”

Lens displacement support

Geometric correction mode Supports horizontal trapezoidal correction ±30°°, vertical trapezoidal correction ±30, correction point stretching

Number of calibration points 2x2 / 3x3 / 5x5 / 9x9 / 17x17

Fusion function support

Fusion zone range Upper edge / lower edge / left edge / right edge : 0% / 10% ~ 50%

Control Protocol Crestron/ PJLink /AMX /Extron

HDBaseT can achieve 10.2Gbps HDMI 1.4 transmission (including HDCP) and 100Mbps Ethernet

Noise value Normal: 36 decibels / Energy saving mode: 30 decibels

3D 3D DLP Link ((up and down, left and right, frame order, frame encapsulation format)

3D Warping supports geometrically corrected shaped active 3D stereo (frame order, frame encapsulation format)

2x360° projection support

Speaker 10Wx2

Body size 405mm (W) x 397mm (D) x 129mm (H) (Does not include foot pads without foot pads)

Body weight 11Kg

input interface:

      VGA In X1 Audio In Jack X1 HDMIx2 HDBaseT x1 MicrophoneX1 RS-232X1 Mini USB X 1 (for F/W upgrade or Interactive)

Output Interface:

VGA Out X1 (VGA In/Out selected by OSD) Audio Out Jack X1

Network interface RJ45X 3 (Support projector control & PoE)

Power: Input voltage: AC 90--264V~50/60 Hz Overall power: Normal state: 480W, Energy-saving mode: 320W, Standby mode: