DHN laser projector 7300 lumen engineering projector
পণ্যের বিবরণ
Brand DHN
Model DM730ST
Projection Technology DLP
Display chip 0.70” DMD XGA
Resolution 1024*768 (4:3) XGA
Light source A new generation of pure solid-state laser light source
Light source life 20000 hours
Brightness uniformity 85% (Typical)
Color uniformity Δ u’v’ ≦0.02
Color standard Rec.709
Scaling ratio
Projection ratio 0.82
Lens displacement Limited range / manual V: 85% - 95% H: 95% - 105%
Screen size 30”~300 ”
Lens displacement support
Geometric correction mode Supports horizontal trapezoidal correction ±30°°, vertical trapezoidal correction ±30, correction point stretching
Number of calibration points 2x2 / 3x3 / 5x5 / 9x9 / 17x17
Fusion function support
Fusion zone range Upper edge / lower edge / left edge / right edge : 0% / 10% ~ 50%
Control Protocol Crestron/ PJLink /AMX /Extron
HDBaseT can achieve 10.2Gbps HDMI 1.4 transmission (including HDCP) and 100Mbps Ethernet
Noise value Normal: 36 decibels / Energy saving mode: 30 decibels
3D 3D DLP Link ((up and down, left and right, frame order, frame encapsulation format)
3D Warping supports geometrically corrected shaped active 3D stereo (frame order, frame encapsulation format)
2x360° projection support
Speaker 10Wx2
Body size 405mm (W) x 397mm (D) x 129mm (H) (Does not include foot pads without foot pads)
Body weight 11Kg
input interface:
VGA In X1 Audio In Jack X1 HDMIx2 HDBaseT x1 MicrophoneX1 RS-232X1 Mini USB X 1 (for F/W upgrade or Interactive)
Output Interface:
VGA Out X1 (VGA In/Out selected by OSD) Audio Out Jack X1
Network interface RJ45X 3 (Support projector control & PoE)
Power: Input voltage: AC 90--264V~50/60 Hz Overall power: Normal state: 480W, Energy-saving mode: 320W, Standby mode:
ইম্পোর্ট / এক্সপোর্ট
পাওয়া গেল না
পাওয়া গেল না
T/T, L/C