General Information

Standard: ASTM B363, ASME B16.9

Material Options: Zirconium grade 702, Titanium Grade 7

Technique: Welded, Forged, Rolled, Seamless

Description

Introduction Of Titanium Pipe Elbows

If you want to connect your pipe at a 30°, 45°, 90° or 180° angle with a titanium pipe elbow, in your pipe systems, our titanium pipe elbows add strength and air-tight security to bends in your pipework. We carry titanium bends in grades 2 and 7, as well as zirconium grade 702. Titanium 45 Degree Elbows and Titanium 90 Degree Elbows in size Range of 1/2″ NB to 48″ NB. All the elbows are manufactured in compliance with ASTM B363, and ASME B16.9. Titanium elbows can be either seamless or welded type intended for general corrosion – resistant and elevated – temperature service.

Processing

Titanium Elbows may be made from billets (ASTM B348), Titanium Plates (ASTM B265), Titanium Forgings (ASTM B381) and Seamless or Welded Pipe or Tube (ASTM B861 & B862).

Forging, forming, or shaping operations may be performed by hammering, pressing, piercing, extruding, upsetting rolling, bending. fusion welding, or by a combination of two or more of these operations. The fittings shall be manufactured in accordance with the dimensional requirements of ASME B16.9. And the materials would be delivered in stress – relieving annealed conditions.

Request a quote for your specific pipe fittings application. Custom sizes are available upon request.

Application

Titanium Elbow are widely used in chemical, petroleum, metallurgy, light industry, power generation, water desalination, medical apparatus and instruments, alkali, salt, electroplating, coking, chemical fertilizer, etc.