Model: DHN-DU6100

Projection Technology: DLP

Display chip: 0.67” DMD

Resolution: 1920*1200

Light source: pure solid-state laser source

Light source life: 20,000 hours

Brightness: 6100 lumens

Contrast: 300000:1

Brightness uniformity: 85% (Typical)

Color uniformity: Δu’v’ ≦0.023

Lens aperture factor: F/2.3-3.15

Projection ratio: 1.2~2.13

Lens shift: limited range, manual V: 100% - 120% H: : 90% - 110%

Screen size: 27.9"~ 301.8"

Lens shift: support

Geometric correction mode: correction point stretching

Number of calibration points: 2x2 / 3x3 / 5x5 / 9x9 / 17x17

Converged features: support

Fusion zone range: top edge / bottom edge / left edge / right edge : 0% / 10% ~ 50%

Control Protocol: Crestron / PJLink / AMX /Extron

HDBaseT: Enables 10.2 Gbps HDMI 1.4 transmission (including HDCP) and 100 Mbps Ethernet.

Noise value: Normal: 35 decibels / Energy saving mode: 29 decibels

3D: 3D DLP Link

2x360° projection: support

Speaker: 10W x2

Body size: 405mm (W) x 397mm (D) x 129mm (H) (without foot pad)

Body weight: 11Kg

Input interface: VGA In X 1 , Audio In Jack X 1 , HDMI x 3 , HDBaseT x 1 Microphone X 1 , RS-232C X 1 , Mini USB X 1 (for F/W upgrade or Interactive) Output interface: VGA Out X 1 (VGA In/Out selected by OSD) , Audio Out Jack X 1

Network interface: RJ45 X 3 (Support projector control & PoE)

Power: Input voltage: AC 90-264V~50/60 Hz

Machine power: normal state: 480W, energy saving mode: 320W, standby mode: