• Энгельса,
  • Moskva,
  • روسی
  • ٹیلی فون:79662069777
  • فیکس: ---.---.-----
  • یو آر ایل:

Injection Moulding Machine, model GL300, Husky

انجکشن، پلاسٹک - مشینری

درخواست پر

استعمال کیا جاتا ہے

دستیاب نہیں

کینیڈا

پوچھ گچھ

مصنوعات کی وضاحت

Item 1 : one (1) Injection Moulding Machine, model GL300, built by

HUSKY Injection Molding Systems Ltd., Bolton, Canada in 2002.

Extruder Unit ‘A’

Screw Diameter 120 mm

Screw L/d Ratio 25:1

Screw Speed (max.) 60 r*min-1

Screw Torque 11.925 Nm

injection volume 3.040 cm3

Transfer Weight (max.) 5.202 grams

Transfer Volume 4.524 cm³

Plunger Unit ‘A’

Shooting Pot Diameter 110 mm

Injection Pressure 1183 bar

Injection Capacity 3.231 cm³

Clamp Unit

Clamp Force 3.000 kN

Tiebar Spacing W x H 720 x 720 mm

Platen Size W x H 1036 x 1046 mm

Clamp Stroke 700 mm

Shutheight (Min./Max.) 450/900 mm

Daylight 1.600 mm

Ejector Stroke 225 mm

Ejector Force (Center) 75 kN

Ejector Force (Booster) 264 kN

Tiebar Diameter 115 mm

Stationary Platen Thickness 300 mm

Moving Platen Thickness 250 mm

Clamp Accumulator 32 l

Machine Voltage 400± 5%/3ph/50

Hz/4W/EN

Electric Motor Power 150 kW

Standard Cabinet 40 C°

 left: HMI, Operating Panel (Screen)

Primary Screen

Language: English

Secondary Screen

Language: German

Nameplate Language: German

Various

Color : Husky Standard Beige

Item 2 : one (1) Preform evacuation T-type-discharge conveyor

Cooling water requirements

(machine)

capacity /flow volume/input

temperature/pressure

77 kW/66.200 Kcal/ 7 m3

/h -

28 °C 6 bar

Cooling water requirements

(per mould, robot and

dehumidifyer)

capacity /flow volume/input

temperature/pressure

180 kW-700 l/min-42 m3

/h at

6 °C

at 7 bar

Item 3 : one (1) PET-Resin Drying System, model LUXOR GAZ 1200 with ETA

BOX GAZ and preheating, manufactured by MOTAN GmbH, Germany in 2002.

Technical Data

dry air output 1.000-1.200 m³

connected power 59 kW

control voltage 24 V DC

max.fuse 125 A

natural gas consumption gas category I2LL

(DIN EN 437 A.1 – DE)

nominal connection pressure 20 hPa

supply air 450 Nm³/h

exhaust air 460 Nm³/h [@120°C]

air systems pressure .............. 5-7 bar

compressed air consumption max. 4,3 l/h

dew point < -30°C

weight approx.1200 kg

Item 4 : one (1) Mold/Robot Area Dehumidifyer, model EISBAER DAS 112,

manufactured by EISBÄR Trockentechnik GmbH, Austria.

Technical Data

Pre-Cooler

Air/Water-Heat exchanger

Type: CW-SP-2,1-900-600-10R-40-S-Cu/Al

Material: Cu-Alu

Inlet pipe connection: 1 inch inner thread

Putlet pipe connection: 1 inch inner thread

Cooling water capacity (nominal): 0,91 l/s

Water temperature: min. 0 °C

Water pressure: max. 10 bar

Re-Cooler

Air/Water-Heat exchanger

Type: CW-SP-2,1-650-250-6R-10-SCu/Al

Material: Cu-Alu

Inlet pipe connection: 1 inch inner

thread

Outlet pipe connection: 1 inch inner

thread

Cooling water capacity (nominal): 0,20

l/s

Water temperature: min. 0 °C

Water pressure: max. 10 bar

Desiccant Drier

Type: SSCR 550H10

Process air flow (nominal): 1100 m3/h

Regeneration air flow (nominal): approx. 450 m3/hDesiccant: sintered Silicagel

(SIO2)

Weight: approx. 20 kg

Air distributor: Continuously rotating

Ventilator

High pressure radial ventilator.

Type: HRE250-03-LG0

Housing: Sheet steel housing

Weight: approx. 15 kg

Ventilator motor, type: 90L-4/6

Voltage/current: per operational specifications

Frequency: customers specifications (50 or 60 cycles)

Power input: 1,45 kW

Drive motor, Type: AS 20-4

Voltage: 230V

Frequency: 50/60 cycles

Speed: 7,8/9 rpm

Power consumption: 40/44 W

Capacitor 0,27 μF

Belt 1870 5M 09

Air filter; Class: EU3

Electrical supply

the dehumidifier DAS112 is constructed to use any available voltage and a

defined frequency (50 Hz).

Current: rotary current

Connection: L1,L2,L3 + PE/PEN

Voltage: customers specification

Frequency: customers specification (50 Hz)

Power consumption: ab. 11 kW (nom.)

Fuse protection: 14,75 kW

Maximum main fuse: 32 A

PRICES & COMMERCIAL CONDITIONS

Price for items 1-4, “as is”, “where is (GloCon)” € 115.000,--

MOLD:

One (1) pre-used, functionally maintained complete HUSKY-mold for preform

mold with 48 cavities for production of 36-g-preforms with 38-mm/3start-neck

finish (see attached drawing of this preform) -

Price (“as is”, “where is”)