• #1809,Jianhu Rd, Kexi Industrial Area, Keqiao, Shaoxing, Zhejiang, China
  • Shaoxing, Zhejiang, 312030
  • Kina
  • Tlf:86 0575-84138681
  • Faks: ---.---.-----
  • Url:

Introduction of Uncoiler and Its Functions and Features

Maskiner og utstyr til næringsmiddel- og drikkevareindustrien

PÅ FORESPØRSEL

New

Ikke tilgjengelig

Ikke tilgjengelig

Spørre

Produktbeskrivelse

2020-12-29

Uncoiler is special equipment for sheet metal leveling. It is applied to the leveling line of steel plates and uneven plates, which can form uncoiling, leveling, shearing production lines, and other plate product production lines according to related configurations. The uncoiling machine is suitable for industries such as machinery, vehicles, metal products, household appliances, steel structures, and decoration.

Uncoiler machine is one of the essential equipment in the welded pipe production line. On the one hand, its function is to support the steel coil by tightening the inner hole of the steel coil; on the other hand, it is to feed the head of the steel strip into the leveling machine through the rotation with the cooperation of the straightening machine. Therefore, the performance of the uncoiling machine is very important to the entire production line. In many years of design practice, we have continuously optimized and improved the structure of the uncoiling machine, which has improved the performance of the uncoiling machine.

The main shaft of the steel uncoiler has two functions, namely, to drive the steel coil to rotate and to support tension of the steel coil. The realization of tightening is usually done by pushing the inclined slider by the oil cylinder or air cylinder installed with the main shaft. Small units use multiple cylinders, and large units use multiple cylinders; the realization of rotation is usually accomplished by the motor driving the main shaft to rotate through a reducer. The oil cylinder or air cylinder installed on the main shaft must rotate together with the main shaft, and the oil cylinder or air cylinder needs to be connected to one end of the working medium pipeline, and the other end of the pipeline is connected to the hydraulic station or solenoid valve.