The principle of this pot magnet is to glue one piece of solid disc magnet, either NdFeB or Ferrite, into the steel housing. Then, depending on customer's applicational requirement a cover made of stainless steel is available.

NdFeB Flat Pot Magnet

These NdFeB pot magnets are often glued at places where holding is needed, but screw is not wanted for the protection of the surface.

Ferrite Flat Pot Magnet

These flat ferrite pot magnets are often used by gluing at places for holding; nails, screws are not used to protect the surface.

NdFeB Flat Pot Magnet With Stainless Steel Cover

This NdFeB pot magnet features a stainless-steel cover that seals the magnet off, keeping moisture, dust out for a healthy working environment of the neodymium magnet inside.

Pay Attention When You Use Shallow Pot Magnet / With Steel Cover. Being flat makes it easy for these magnets to stick to each other even stronger and not easy to separate, which may bring some unexpected danger if not operated correctly. So, always wear gloves before you do anything with these pot magnets and operate with great care to avoid sudden attraction of them.

The principle of the shallow pot magnet is to glue one piece of solid disc magnet, either NdFeB or Ferrite, into a shallow steel housing/cup to get a more durable magnet assembly with stronger magnetic adhesive force. Then, depending on customer's applicational requirement, a cover made of stainless steel is available. If using a deep steel housing/cup, then Deep Pot Magnet is made.

Comparing with a plain magnet, shallow pot magnet covered with a steel cup which is much harder, so it is also more durable than a plain magnet. Besides, when a neodymium magnet is covered with a steel cup to make a pot magnet, not only its pull force becomes stronger, but also the cost will be decreased. Since pot magnet uses less neodymium magnet material to get same pull force with a same sized plain magnet, the steel cup is able to concentrate the magnetic field of the neodymium magnet on the working side, so pot magnet is magnetic on one face only, creating very strong adhesive force for holding and lifting purpose.

Shallow pot magnet is designed for a wide range of applications where space is restricted, but it is still wide range of size options available. It is able to be produced with countersunk hole, threaded bush, external thread etc. And the inner magnet could be ferrie magnet, NdFeB magnet, SmCo magnet, and rubber magnet.

We are able to produce a shallow magnet with stainless-steel cover with several small disc magnets in it, of same pull force, shear force, but lower cost. And the stainless-steel cover could prevent the magnet from being scratched, wetted, oiled or dirty. It has the outstanding advantages of corrosion resistance, waterproof property. So it can be used in harsh conditions.

Pay Attention When You Use Shallow Pot Magnet / With Steel Cover. Being flat makes it easy for these magnets to stick to each other even stronger and not easy to separate, which may bring some unexpected danger if not operated correctly. So, always wear gloves before you do anything with these pot magnets and operate with great care to avoid sudden attraction of them.

WEIZHONG is a professional magnet manufacturing company, we provide custom rubber magnet, magnet and steel cover, magnet manufacturing and etc. Want to know more? Please contact us.

There are many magnetic assemblies manufacturers, but we are one of the best choices for you.