PA66GF15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.

PA66 GF15 Storage and Handling

PRE-PROCESSING：

Pre-drying: 4-6h / 130°C

Processing:

Melting temperature 280 - 300 °C

Mold temperature 60 - 100 °C

Product storage and handling:

PA is a highly hygroscopic material. When the dry PA material is exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.

PA6 GF 15 Heat Stabilized (A2006C) Typical Application

PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.

Suzhou ANMEI Material Technology Co., Ltd. – the professional supplier of engineering plastic and the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.