Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector
Deskrizzjoni tal-prodott
Quarter wave RF surge protector is designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, induced over-voltage, induced over-voltage, and operation over-voltage. The RF coaxial lightning surge arrester/suppressor is widely applied in rf surge protection of wireless coverage, base station, etc.
Smart antenna, SDMA
IEEE G902 wireless LAN
IEEE 802.11b and 802.11g wireless LAN
PTN, MSPT
Transport Network
Access Network, FTTX, UTRAN
Base station antenna feeder
ISM
MMDS
Cellular
PCS
GPS
2G, 3G, 4G communication
GSM, CDMA, WCDMA, TD-LTE, FDD-LTE
Features Of 1/4 Wave RF Lightning Arrestor
Wide frequency band
Large discharge current
Extremely low insertion loss and VSWR
QWS technology
Good performance from DC to 3GHz
Low strike throughput energy
Withstand multiple lightning strikes
Bi-Directional Protection
Technical Parameters Of 1/4 Wave RF Lightning Arrestor
Model R27DF-1/4 R27NF-1/4 R60NF-1/4 R05NF-1/4
Lightning protection zone(LPZ) 1-2
Class
According to DIN VDE 6075 Part 6 (Draft11.89)A1, A2 C
According to IEC61643 II
Max discharge current Imax (8/20µs) Imax 50KA 40KA 40KA 30KA
Working frequency 0.8--2.7GHz 0.8--2.7GHz 2.3-6GHz 0.4-0.5GH
Protection level In Up ≤200v
Insertion Loss ≤0.1db
Standing-wave ratio ≤1.15
Interface form UHF N DIN BNC
Working conditions Temperature: -40 to 80℃, Relative humidity: ≤95%
Standards compliance IEC6000, EN60950
Mounting Be installed between protected equipment and the signal line
Material stainless steel +Copper/ silver white
IP code IP20
Connector type DIN N N N
We can offer kinds of surge protector for sale, if you have needs, please leave us a message.