2 In 1 SPD for CCTV M10-24 D12BM Signal SPD
Produkto aprašymas
2 in 1 monitor lightning arrester(power and video), a Kind of SPD, designed for analog video/ digital camera to protect camera power, video line from lightning electromagnetic pulse, induced over-voltage, operating overvoltage.
Feature of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
2 in 1 protection
TVS array technology, low capacitance
Multi-Strike Capability
Application Of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
Designed to protect monitor equipments (Power, Video), widely applied in bank monitor & safe guard system.
Monitor equipment for school, enterprise, road etc. security and protection.
Technical parameters of 2 in 1 SPD for CCTV M10-24 D12BM signal SPD
Model M10-12/D12BM M10-24/D12BM M10-220/D12BM
Lightning projection zone(LPZ) 2
Standards Compliance IEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2
According to IEC61643 III
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 D
Max continuous operating voltage Uc 12VDC
Nominal discharge current (8/20µs) In 3KA
Max discharge current Imax (8/21µs) Imax 5KA
Transmission rate Vs 100Mbps
Limiting Voltage(10/700µs)component wire-Enclosure 40V
Nominal working voltage(Un) 12V 24V 220V
Max continuous operation voltage(Uc) 15V 30V 275V
Nominal discharge current Imax(8/20µs) 5kA
Max discharge current Imax(8/20µs) 10kA
Load current 0.5A
Protection level Up ( In) 60V 100V 900V
Response time (Ta) 1ns
Mounting Be Installed between protected equipment and signal line
Working conditions Clamped type
Dimension 112*60*25mm
Interface form BNC
IP code(IEC EN 60529) IP20
Error rate ≤10-12
Material/color Aluminum/Blue
Insertion loss ≤.0.5dB
Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95%
If you want to know more applications of surge protection for cctv systems, please visit our website.
As a reliable spd supplier, we will do our best to meet all the needs of customers.