High Accuracy Single-Axis MEMS Gyro
Description du produit
Introduction
ER-MG-057 is a single-axis MEMS angular rate sensor (gyroscope) capable of measuring angular velocity up to a maximum of ±400°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word.
ER-MG-057 is intended for industry, instrumentation, stabilization, and other high performance applications. An advanced, differential sensor design rejects the influence of linear acceleration, enabling the ER-MG-057 to operate in exceedingly harsh environments where shock and vibration are present.
ER-MG-057 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−45°C to +85°C).
Features
Proven and robust silicon MEMS gyro
Up to ±400°/s measurement range
1°/hr bias instability
0.2°/√hr Angular Random Walk
Digital output (SPI slave)
5V operation (4.75~5.25V supply)
Low power consumption (35 mA)
High shock and vibration resistance
Hermetically sealed ceramic LCC surface mount package (11 x 11 x 2mm)
Integrated temperature sensor
RoHS compliant
Application
Precision instrumentation, stabilization
Guidance, navigation, control
Avionics, unmanned vehicles
Precision autonomous machines, robotics
Specification
Input Range 400 dps
Bandwidth 200 Hz
Data Output Rate 2K Hz
Latency 2 ms
Scale factor 20000 LSB/°/s
Scale factor non-linearity 200 ppm
Scale factor temp drift(1б) 500 ppm
Bias temp drift (1б) 50 dph
Bias temp drift (1б)
(After Temp compensation)
10 dph
Bias instability 1 dph
Bias stability (1б 10s) 4 dph
Bias stability (1б 1s) 12 dph
Run to Run Repeatability 4 dph
RMS Noise (1-200Hz) 0.1 dps
Random walk (ARW) 0.2 °/√h
Start up time 0.8 s
G-sensitivity 5 dph/g
VRC 0.5 °/h/g²rms
Shock 12g Rms
Vibration 1000g 5ms 1/2 sine /
Operation Temperature -45--85 ℃