Integrated Gas Technologies(IGT®) supplies PVC gas hose and Rubber gas hoses which are used to connect fittings, consuming appliances and piping and etc. Each IGT gas extension pipe assembly is tested 100% gas-tight by compressed air at 20bar.

Various hose standards can be offered. For the EU, EN16436-1 and EN16436-2 are predominantly used. Class 2 hose for reduced pressure and class 3 hose for unreduced pressure. For class, 3-IGT applies heavy sleeves with improved lifetime and durability with 300 NM pull force resistance.

Features on IGT Gas Hose

Function

Temperature

Durability

Expiration

Timely Replacement

Recommendation

Take Notice

Other Materials

IGT Gas Hose

To connect fittings, consuming appliances and piping.

Cold-resistant to -30°C

Various hose standards can be offered. For EU EN16436-1 and EN16436-2 are predominantly used. Class 2, for reduced pressure and class 3 for unreduced pressure for class 3-IGT apply heavy sleeves with improved lifetime and durability with 300 NM pull force resistance.

Use the A900-008 install date label to monitor the end-of-use date.

PVC hose is price competitive but has short durability of less than 5 years. Recommended exchanged after 3 years or whenever it is due.

Each IGT Hose assembly is tested 100% gas-tight by compressed air at 20bar. A rubber hose is recommended due to its longer durability, and fire resistance. It can last up to 10 years. Recommended exchanged after 5 years of use or whenever it is due.

When Brass-Brass connections are used gas-tight connections can be obtained at