you need an ethernet cable or a hardwire to establish the connection between your ISP internet broadband modem and your Netgear router. Make sure that the wires are plugged properly. When lights on router come up as steady green. It means your Netgear router is ready to work.You can use your computer, laptop, cell phone or any tablet that you like in order to log in to routerlogin.net. If you are using a computer or laptop you can directly connect the computer from the back of your Netgear router to the no.1,2,3,4 port with the help ethernet cable and if you don’t have an extra ethernet cable or computer, you can use wifi connection on your computer.. Now you need to open up a browser whatever you’re like and type the address on the top address bar which is www.routerlogin.net or you can directly type your router IP address as well 192.168.1.1 than press ok or hit enter.

A page will come up automatically which says Username and password and that’s the login page of your router to set up your Netgear router or to access the login page of your router settings.

you need to fill the information (ie. default username: admin) (default password: Password ) while filling this username and password you should make sure that it should be case-sensitive.

Press ok and you will get your Netgear smart wizard page to set up or to make changes on your Netgear router.

click on automatic setup to setup your Netgear router or click on the different options to make changes on your Netgear router according to your choice.