Pure steam generator is one of the important equipment used in tank equipment, pipeline system and filter sterilization, and can also be used to drive the sterilizer. The quality of pure steam condensate prepared by Biocell pure steam generator meets the requirements for water for injection in the current USP, EP, JP and ChP, and also meets the relevant standards of EN285.

TYPES OF PURE STEAM GENERATION SYSTEM

Pure Steam Generator

Pure steam generator is a device that uses water for injection or purified water to produce pure steam. It is widely used for sterilization and disinfection of medical and health care, biopharmaceutical industry and food industry, as well as disinfection of related appliances, to effectively prevent re pollution of impurities such as heavy metals and pyrogens.

Clean Steam Generator

The clean steam generator is used to generate pure and clean steam without any harmful substances and impurities. It is used in the food, cosmetics and pharmaceutical industries, as well as in the sterilization and any direct steam heating processes with high requirements for steam quality.

PURE STEAM GENERATOR WORKING PRINCIPLE

Pure steam generator is composed of evaporator, preheater, buffer tank, condenser, electrical appliances, instruments and pipelines.

Its working principle is: qualified raw water enters the branch condenser after being pressurized by the raw water pump, and then enters the separator and evaporator. The liquid level is controlled by the liquid level switch. The industrial steam enters the evaporator to heat the raw water to the evaporation temperature and form a strong thermal cycle in the evaporation chamber and separation chamber. After the raw water evaporates, the steam with water droplets will enter the separator, and the water droplets in the separator will be separated from the steam under the action of gravity and incorporated into the raw water. In addition, the unique steam water separation device on the upper part of the separator will generate ultra pure steam on the upper part of the separator.

PURE STEAM GENERATION SYSTEM INTERACTIVE FLOW CHART

FEED WATER

Feedwater must be pumped into the generator, typically at 10 psig above the operating pressure. The flow is usually controlled by level.