China MS Wooden Boxes Co. custom wooden box manufacturer

Manufacturer of wooden box, wooden The process of making the box is not very common, and the manufacturing process of the box is complicated. Today, Xiaobian takes everyone to understand the process of making a simple box.

First cut and cut the sheet by size

Cut the board according to the planned dimensions of the drawing, slotting, hollowing, etc.

The next good material is assembled and reinforced, and the size must be high precision without deviation, no gaps, etc.

Cut some parts of the dark layer (organ) of the box and empty it at the desired location

Then make one long and one short piece of wood as shown below, and the angle of the bevel should be mastered, then fix a short piece of glue to the groove; place a long piece of wood on the groove and place a piece of copper. And stick it tightly, and finally stick the stick to the top of the short strip of wood. The end of the piece of copper should be higher than the sheet.

Then drill holes in the inside of the box as shown in the figure, place the spring as the power part of the mechanism, and then reinforced the partition on the dark layer of the wooden box.

After the glue is dry and adhered, the wooden box is chamfered as showine box, wooden gift box, wooden craft box, wooden tea box, wooden coin box, wooden craft box, wooden jewelry box, soft bark wooden box etc. wholesale supplier in China wooden jewelry box manufacturers

Welcome to contact us, and our website:

www.woodenboxmanufacturers.com