Synthetic Sticker Paper FWMPP75-W58O35J

The Synthetic Sticker Paper FWMPP75-W58O35J is a premium sticker paper that is constructed from strong and water-resistant components. It can be applied to a number of different situations.

Specification of Synthetic Sticker Paper FWMPP75-W58O35J

weight thickness material

Face Material 65±10%g/m2 ISO 536 0.075±10%mm ISO 534 Matte opalescent polypropylene film with special coating on the surface

Liner 60±10%g/m2 ISO 536 0.055±10%mm ISO 534 Super calendered semi-gloss white glassine backing

Adhesive A general permanent acrylic emulsion. This is a permanent adhesive with excellent low temperature resistance and balanced initial adhesion, peeling force and holding force. It has excellent performance on many packaging materials. It can be used for non-direct contact labeling of products such as food, electronics and cosmetics.

Peel adhesion initial adhesion 20 minutes Peel adhesion value on 20 minutes Peel adhesion value on

10N/25mm FTM 9 st.st steel at 180° 6N/25mm FTM 1 st.st steel at 90° 5N/25mm or tear off FTM 2 st.st

Temperature Min. Appl. Temp. 0 ºC Service Temp. -50ºC±90ºC (24H after labeling)

Applications of Synthetic Sticker Paper FWMPP75-W58O35J

This synthetic sticker paper product is matched with O35J adhesive. The adhesive has excellent performance and strong initial adhesion, which can meet the requirements of bending, disinfection and low temperature performance on different blood bags. The product has moderate softness and excellent adhesive viscosity. Waterproof and oil-proof, with certain tensile and tear strength, excellent low temperature resistance, stable physical and chemical corrosion resistance, can be pasted with cylindrical small-diameter bottles with appropriate curvature, but cannot be used to paste irregular curved surfaces or spherical surfaces.

The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.

Printing Methods of Synthetic Sticker Paper FWMPP75-W58O35J

The surface has a special coating with printability. The surface of the material is specially processed to enhance the surface activity of the material and improve its adsorption capacity for ink. It is suitable for most printing methods and inks. Prepress ink and ribbon testing is necessary. It can be printed with all-resin ribbon, and the surface of the specially treated material is suitable for writing with a ballpoint pen. Overprinting and die-cutting can be adjusted on a rotary machine. Excessive tension should be avoided, causing the adhesive to overflow.

Shelf life

12 months, applicable only to the material delivered by pharmaceutical label stock manufacturer Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.

Storage area must be dry and clean.

Keep the material in the original packaging when not used in order to protect it from dust and contamination.

Do not expose to direct sunlight or heat sources.