XKDL-4000 Character Smart Set Sulfur Analyzer

Sulphur Analyzer

Product Name: Character smart set sulfur analyzer

Product Type: XKDL-4000

Product Overview:

The company produces XKDL-4000 Character smart set sulfur analyzer. mainly for the determination of coal. coke. oil and other substances in the total sulfur content of coal. electricity. chemicals. building materials. geological exploration. commodity inspection. environmental testing laboratories and other departments the preferred essential equipment.

The instrument is based on GB / T214-2007 "analysis of total sulfur in coal method" Coulomb titration method and design. is based KZDL series. as well as other existing domestic sulfur analyzer improved on research and development from.All measurement process of the instrument microprocessor intelligent control. such as a new addition: automatic control electrolysis switch. PID control furnace flow patterns. and many other intelligent control functions; the microprocessor by a variety of calibration and test data processing. so that measurement data stability. good parallel samples. the accuracy and precision of results is better than the national standard GB / T214-2007 requirements. and large-screen character display. friendly interface. easy to learn and easy to use the keyboard. the higher the degree of automation intelligent control. small size and many other advantages. it is the ideal laboratory instrument measuring sulfur.

Features

1.Friendly interface. easy to learn easy to use keyboard.

2.Furnace temperature furnace adopt PID mode control flow. high precision temperature control. can effectively protect silicon carbon tubes and prolong life.

3.Set the furnace temperature correction can be entered directly from the keyboard changed.

4.Intelligent Control electrolysis switch on and off. not due to open. the shutdown sequence is generated through the electrolytic phenomenon.

5.Do you can always see when coal furnace. furnace flow. indicating voltage. process time. and the sulfur content of the test process at a glance.

6.Automatically determine the titration end point. shorten test time and improve work efficiency.

7.If the input water content value is calculated printing dry sulfur and moisture values.

8.The instrument can be powered down memory the latest 100 history. and are free to print history.

Technical parameters:

Sample combustion analysis time is about 5 minutes. intelligent judgment titration end point return.

Temperature Accuracy: 1.0; heater silicon carbon tubes. high temperature zone length ≥90 mm,

Working temperature: 1150 ± 5 ℃ (the temperature can be adjusted as needed).

Heating rate: 25-30 ℃ / min. for about 45 minutes up to about 1050 ℃.

Cell: a volume of 450 ml. platinum electrodes.

Stability of the instrument: 1 minute boot into a stable state.

Instrument Dimensions (mm): Controller: 365 × 155 × 340

High-temperature furnace: 580×250×270

Purifier: 258×300×360