Gas-phase stem cell tank has the following characteristics:

A capacity, especially large capacity

Conventional liquid nitrogen tank capacity of 175 liters, or slightly larger than 175 liters;

Vapor phase liquid nitrogen tank is very different, 350 liters is only its small size, the larger is 1800 liters;

The capacity corresponds to the storage volume, the conventional liquid nitrogen tank to store biological samples up to about 6000, the gas phase liquid nitrogen tank storage capacity of tens of thousands.

Two modes, dual mode support

Conventional liquid nitrogen tanks have only one mode, i.e. pure liquid phase, where samples are immersed in liquid nitrogen;

Gas-phase liquid nitrogen tanks support gas-phase and liquid-phase modes, which can be stored in liquid nitrogen, or the sample can be separated from liquid nitrogen for storage. However, the comprehensive capital investment, sample safety and management convenience, almost always choose the gas phase mode to store liters.

Three management, a smarter way

Take the replenishment of liquid, conventional liquid nitrogen tanks either looking for gas companies, or with the replenishment tool - liquid nitrogen pumps or self-pressurized liquid nitrogen tanks, and need to be manual.

Gas phase liquid nitrogen tanks, only need to be equipped with a good refill tank, you can realize fully automatic refill, and there is a liquid level alarm function, conventional liquid nitrogen tanks want to alarm need to be added to the liquid level detector/alarm.

In addition to automatic replenishment and liquid level alarm, the gas phase liquid nitrogen tank also supports remote alarm and temperature alarm, etc. Its intelligent monitoring and management system, which also records the sample data, can demist with one key when opening the lid; there is a hot gas bypass and excellent long time temperature maintenance after opening the lid, which is a great convenience for users.