The pipe X ray machine for spiral steel pipes is suitable for non-destructive testing of the quality of spiral steel pipe welds. The industrial xray equipment can quickly and efficiently detect defects such as pores, looseness, inclusions, and incomplete penetration in spiral steel pipe welds.

SPECIFICATION OF INDUSTRIAL X RAY EQUIPMENT FOR STEEL PIPE INSPECTION

Cooling output: 3KW

Cycle rate: The system flow is greater than 6L/min

Flow setting value: 4L/min

Temperature setting value: 40℃

Power supply voltage: single-phase 220V±10%, 50/60Hz

Current: ≤2.3A

Noise: 58dB distance 1 meter

Coolant: pure water

Computer host: Lenovo business computer, high resolution graphics card.

Grayscale display: 19 inches, 1M, black and white LCD display

Burner: DVD burning drive

INDUSTRIAL X RAY EQUIPMENT FOR STEEL PIPE INSPECTION FEATURES

1. The X ray steel pipe testing & expanding machine real-time imaging system adopts imported high-frequency ray source, and can choose to use computer or microcomputer controller to control the generation of ray.

2. Adopt PLC control system, high degree of automation.

3. The x ray machine for pipeline system can be customized according to the needs of customers, and it can be used in conjunction with the assembly line of the production workshop.

SYSTEM CONFIGURATION OF INDUSTRIAL X RAY EQUIPMENT FOR STEEL PIPE INSPECTION

1. X-ray flaw detector;

2. DR imaging unit (flat panel detector);

3. Computer image processing system;

4. Mechanical transmission system;

5. Automatic control system;

6. Protective lead room system;

7. On-site monitoring system.

X-RAY NON-DESTRUCTIVE TESTING EQUIPMENT COMPOSITION

X-ray nondestructive testing equipment is mainly composed of three parts: X-ray machine, X-ray detector, image display and processing. Every part of it is indispensable.

X-ray machine: emits X-rays. Determines the penetrating power of the emitted X-rays.

Medical X-ray machine, used for medical chest X-ray, with low energy and high current.

Industrial X-ray machine for industrial non-destructive testing with high energy and low current.

Portable X-ray machine, light and portable, low dose.

Micro-focus X-ray machine, high precision, high resolution.

X-ray detector: Receives X-rays. Determines the quality of the acquired X-ray images.

Rare earth scintillation screen + CCD, cheap.

X-ray image intensifier + CCD, the solution is mature.

Flat panel detectors, high definition, expensive.

Line array detector, high definition, high speed.

Image display and processing: display and process X-ray images. Determine the degree of digitization and automation of non-destructive testing.

Industrial television, manual observation.

Computer digital processing, manual observation, digital image processing.

Computer automatic identification system, computer automatic identification, digital image processing.

A complete set of X-ray non-destructive testing equipment, in addition to the above three parts must have, there are some auxiliary devices, such as X-ray shielding lead room, mechanical transmission and so on.

The application fields of X-ray nondestructive testing are very wide, and the requirements of the inspected items are also different. Therefore, a set of professional X-ray non-destructive testing equipment needs to be tailored according to the requirements of customers. While achieving the purpose of automatic testing, the equipment cost should be reduced as much as possible to maximize the cost performance.

The user only needs to put forward the detection requirements, within the scope of the existing X-ray detection technology, we can provide the most suitable multiple sets of solutions for the user to choose.

X-ray non-destructive testing requirements that users need to provide:

Inspection targets, i.e. looking for defects, impurities, or non-contact measurements.

Resolution, i.e. the smallest defect or detail size detected.