Mobile Security Barriers are the specially designed facilities combining vehicles and razor wire coils, used by army and police to secure, protect a place or location who try to enter / penetrate the defense, with the effect of frightening, stopping and reducing physical contacts. The rapid deploying of this mobile security barrier takes ± 5 minutes while the packaging may take ± 10 - 20 minutes.

Mobile Security Barrier complete unit includes a towing vehicle and a trailer unit (Caravan) which contains 4 coils of concertina wire module at length of 150m as standard setting, including 3 coils concertina razor wire with a length of wire barrier @ 40 meters and 1 module of razor barbed wire barrier at a length 30 meters.

The detail Technical Specification of Mobile Security Barrier is as below.

Tech spec description

Ripper Blade Razor Barbed Wire Coils Units

3 SD Barbed Tape Wire - BARRIER

a. Form of razor barbed wire, spiral-shaped and arranged into three sections (1 top, 2 bottom) contained in special packaging such as caravans making it easy to move, quick installation and packaging.

b. Dimension / size of standard razor barbed wire barricades for Police:

1) Diameter of coil: 900 mm

2) the coil diameter: 700 mm

3) The length of the barricade minimum: 120 meters (3 x @ 40 m)

4) The width of the barricade: 1.4 to 1.5 m

5) High barricades: 1.5 to 1.7 m

6) barbed wire Diameter: 2.4 to 2.6 mm

7) The distance between spines: 12 - 50 mm

8) The width of spines: 12 - 15 mm

9) High spines: 6 - 7.5 mm

10) Type / Thickness of thorns: Ripper Coil / 0.45 to 0.5 mm

11) The number of spirals: 55 of each coil (each 10 meters)

12) Number of clips: 5 each spiral

13) Equipped with sling stopper wire diameter of 5 mm

c. Razor wire materials:

1) Material of wire core (core) is a stainless steel wire (High tensile) with a minimum tensile strength of 170.1 kgf / mm ² cross-sectional area 4.91 mm ², wire cross-sectional diameter of 2500 mm with a load of 835 kgf min.

2) Material of razor or barbed is a thin steel plate (0.45 to 0.50) mm shaped like a razor and a wire attached to the core that the barbed wire into a single unit. Both materials are galvanized steel with coated layer of zinc with a heavy coating 135-145 g /m².

3) The number of torsion on the torsional test results with the diameter of 2.50 mm and length of 250 mm is 25 torsion.