https://www.pelletfeed.com/grinding.html

Future Fortune is a leader in the manufacture and sale of feed and grain processing hammer mills, with thousands of units installed to date. We optimize the performance of our equipment to meet the unique needs of feed processors, and we can produce the tightest distribution of uniform particle sizes with the least amount of dust. All hammer mill equipment is of carbon steel or stainless steel construction and can be custom configured to suit the customer's material and production goals.

How the grinder works: The material is placed in the feed hopper leading to the grinder head where the rollers and dies are located. The material should not exceed ½ to ¾ of the height of the rollers. The material will be forced through the die by the rollers to generate heat and produce pellets. The pellets will leave the granulator port through the discharge port and will fall by gravity into your container. With the correct heat, moisture recipe, and force (pressure), you should make perfect pellets.

Note: All new pelletizer dies must be adjusted before first use.

Note: The raw material should not be larger than the die hole size. If your material is larger than the die hole size, the material needs to pass through the hammer mill first.

Future Fortune's pellet grinder machine comes with a standard 6 mm die.

Other die sizes range from 3 mm to 8 mm, depending on the model.

Other chip sizes up to 12 mm are available on request and can be special ordered.

All additional dies are shipped free of charge with the purchase of the pellet grinder.