water cooled cable
Deskripsi Produk
WATER COOLED CABLE
Large cross-section water cooled power cables are used for the connection between the busbar system and the EAF arm, transmitting large currents and meeting the movement requirements of the cross arm, such as lifting and rotating. These liquid cooled cables are mainly used for steelmaking the electric arc furnace, ladle refining furnace, and induction furnaces, and are also suitable for submerged arc furnaces after being covered with high-temperature resistant materials.
STRENGTH
CHNZBTECH WATER-COOLED WELDING CABLE STRENGTH
Cable heads are non-contact, solderless, and welded, made from a whole copper rod processed on CNC lathes and milling machines, which are beautiful and durable; The connection between electrodes and wires adopts cold extrusion, which does not damage the wires and has low resistance.
The outer sleeve is made of high-quality rubber hose, which has a water pressure resistance of>0.8MPA and a breakdown voltage of over 3000V. There is also a flame-retardant outer sleeve for users to choose from in special occasions;
The fastening between the electrode and the outer sleeve should be made of red copper clamps for cables below 500mm2, and 1Cr18Ni9Ti material clamps should be used for other cables, which are non magnetic and rust free; Squeezing and fastening with large hydraulic equipment, beautiful, durable, and with good sealing effect;
Soft wire is processed using fine enameled wire on a specialized winding machine. Soft, small bending radius, and large effective cross-section;
Using enameled wire as a water cooled cable has high efficiency in energy transmission. Because each enamelled wire is insulated, conducting medium frequency and high frequency current, and has no surface Skin effect, compared with other water-cooled cables of the same section, when passing the same current, the heat generation is less;
Using enameled wire as the conductor for these wholesale furnace parts can improve the service life of the cables. Due to long-term immersion of the wires of water-cooled cables in water, the working environment is extremely harsh. Previously, we used copper bare wires to make water-cooled cables. After using the water-cooled cables for a period of time, when we opened the cable jacket, we would see a layer of green copper rust on the surface of the wires. Later on, we switched to using enameled wire as a water cooled cable for furnace because it has a protective layer of paint film, which can provide corrosion protection. Users have reported that water-cooled cables made of enameled wire have a service life of 1.5 to 2 times that of copper bare wires.
Now the price of steel furnace for sale is reasonable, anything you need, please contact us.