AUTO RESET PRESSURE SWITCH

Egret BLPS-YKH & BLPS-YKL auto reset pressure switch is very popular among HVAC&R industries. We not only have high pressure switch, open on pressure drop, closes on pressure rise. But also have low pressure switch, open on pressure rise, closes on pressure drop. On the other hand, pressure switch can divide to SPST(Single pole single throw), and SPDT(Single pole double throw). Moreover, it is a type of cartridge mini pressure switches or controls. In terms of pressure connection ports, it has BSP 1/4, BSP 1/8, 3/8, 1/2, G 1/8, G 1/4, NPT 1/8, SAE 1/4 female flare with deflator 7/16-20UNF. Last but not least, The available pressure setting values can be from 0.02-4.6 mpa.

Auto Reset Pressure Switch Specifications

NO. Name Features/setting value

1 Setting range of pressure range 3-667PSI/0.02-4.6mpa

2 Tolerance range of pressure switch 1.45-14.5PSI/0.01-0.1mpa

3 Contact form Normal open, close

4 Contact capacity AC240V,3A,AC120V,6A

5 Contact resistance ≤ 50 MΩ

6 Insulation resistance between terminal and housing ≥100 MΩ

7 Dielectric strength No breakdown and flashing in 1min at AC1500V

8 No burst phenomenon in 1min at ≤5000PSI(34.5MPA) blast pressure

Maximum burst pressure

9 Gas tightness No leakage (4.8mpa/1min)

10 Adaptive temperature -30-80 degree

11 Life cycle ≥100000 times

12 Over pressure Test Increase to 10mpa.No burst and leakage in 10mins

Features of Auto Reset Pressure Switch

Egret BLPS-YKH and BLPS-YKL series pressure switches are normally open & normally closed pressure switches, SPST or SPDT, quick mounting, snap-action, On/Off pressure switches, available in a wide variety of factory-setting, non-adjustable pressure setting values. Moreover, it is a basic snap disc design pressure switch mainly used in machine control applications. Plus, it is widely used in air conditioning and refrigeration systems, heat pump, water purifiers, etc. Important to realize, the pressure data can be set customized from 3-667 psi. And it has many types of pressure mounting ports, such as male thread, female thread, copper tube, etc. In terms of electrical connection, it can be flying leads, spade terminal, etc.

FAQ of Auto Reset Pressure Switch



What is auto reset pressure switch?

It is a disc design, on/off pressure controls for controlling the machine.

01

What is pressure switch used for?

Used for controlling the air conditioning and machines to on or off work by pressure.

02

Is it automatic control pressure switch

Yes, it can control the machine on/off work automatically.

03

Is the pressure settings adjustable?

No, it is factory setting and non-adjustable.

As a tape factory, we can provide kinds of industrial tapes for sale, anything you need, please contact us.