• 12th Floor, Jincheng Centre, Liyuan, Tongzhou, Beiing, China
  • beijing, Beijing, 101121
  • Кина
  • ТЕЛ:86 10 8055 6872
  • Факс:86 10 8055 6871
  • Урл:

Anionic Polyacrylamide Flocculants

Хемикалије

НА ЗАХТЕВ

Нови

Није доступно

Није доступно

Истраживати

Опис производа

SINOFLOC polyacrylamide anionic flocculant are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. We can offer two types of products of anionic polyacrylamide powder flocculant and anionic polyacrylamide emulsion.

Polyacrylamide anionic msds above is only a brief indtroduction. For more details, please contact us.For more details about anionic polyacrylamide powder, please contact us.

Anion flocculant polyacrylamide Feeding:

The solutions of SINOFLOC anionic pam polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic polyacrylamide polymer is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.