SINOFLOC anion polyacrylamide flocculant are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. We can offer two types of products of polymer flocculant powder and anionic polyacrylamide emulsion.

anionic polymer flocculant polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.For more details about anionic polyacrylamide powder, please contact us.

Anion Polyacrylamide Feeding:

The solutions of SINOFLOC flocculant polyacrylamide must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous 

and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyacrylamide polymer  and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thor  ough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic polyacrylamide copolymer  is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.

There are many polyacrylamide anionic polyacrylamide distributors , but we are one of the best choices for you.

If you are looking for a reliable anionic polyacrylamide manufacturer , please contact us.

For more information about anionic polymer, please feel free to contact us!