F105/F305/F505/F505H Advanced Test Stand Frame

This series of force testing machines is engineered for both tension and compression testing, offering force capacities of up to 500 lbF (2.2 kN). Customers can choose between vertical and horizontal models, complemented by a wide selection of force sensors, grips, and fixtures to suit various testing needs.

The IntelliMESUR® software facilitates the setup of tests, as well as the recording and analysis of data, seamlessly integrating with the Series F systems. Users have the option of a pre-configured tablet control panel or standalone software compatible with Windows devices for control and data management.

For those looking to delve deeper into material properties, an optional Materials Testing Calculations Module is available. This module provides a range of standard calculations, including tensile strength, Young’s modulus, yield point, among others, to thoroughly characterize and analyze material behavior.

Additionally, an optional module for Coefficient of Friction (COF) Measurement is offered, expanding the capabilities of the force testers to meet diverse testing requirements.

Features of F105/F305/F505/F505H Advanced Test Stand Frame

1. Rigid and precise by design

Rigid frames and extrusion designs,. Factory compensating the test frames and force sensors control the position accuracy of ±0.002 in / 0.05 mm under any load, any position.

Linear guideway ensure the smooth, quiet operation, with virtually no speed change with load.

2. Convenient modular

Frame bases can be easily removed and extended. Most electronics parts are housed in the frame, easily accessed and replaced.

3. External limits switch

Solid-state upper and lower limits’ switches may be set the test limits or testing exception. Dual-graduated rulers’ aid with switch placement.

4. Perfect force sensor interface

Series FS05 force sensors mount the crosshead of model F105, F305, F505, F505H, no connection cables. Ranges from 0.12 to 500 lbF /0.5 N to 2.5 kN/. Accurate to ±0.1% of full scale.

Series R07 S-beam force sensors is with higher force ranges, compatible with Plug&Test technology. Ranges from 50 to 1,500 lbF /250 N to 7.5 kN/. Accurate to ±0.15% of full range.

5. Easy-to-replace electronics

Most electronic parts are installed in an integrated module, easily replaced no need special tools or complexed processes.

Specification of F105/F305/F505/F505H Advanced Test Stand Frame

F305 F505 F505H

F105

Load capacity*: 100 lbF 300 lbF 500 lbF

[0.5 kN] [1.3 kN] [2.2 kN]

Maximum travel: 18.0 in

[457 mm]

Speed range: 0.02 - 45 in/min

/0.5 - 1,100 mm/min/

Load accuracy Test frame: ±0.1%

(% of full scale) Force sensor alone: Series FS05: ±0.1% | Series R06: ±0.15% |

Series R07: ±0.15%

Peak sampling rate: 20,000 Hz

Data acquisition rate: 1,000 Hz

Speed accuracy: ±0.2% of setting, virtually no variation with any load

Distance accuracy: ±0.002 in /0.05 mm/, all load, factory-compensated

Distance resolution: 0.0005 in /0.01 mm/

Limit switch repeatability: ±0.001 in /0.03 mm/

Overload protection: Motor stops at 120% of full scale of the force sensor

Power: Universal 100-240 VAC, 50/60 Hz, 120W

Fuse type: 1.2 A, 250V, 3AG, SLO BLO

Weight (test frame only): 60 lb 70 lb

/27 kg/ /32 kg/

Shipping weight: 75 lb 85 lb

/34 kg/ /39 kg/

Environmental conditions: Indoor use only;

Up to 6,500 ft /2,000 m/ above sea level;

Temperature: 40 - 95°F /5 - 35°C/;

Humidity range: up to 80% relative humidity 31°C,

decreasing linearly to 50%;

relative humidity at 40°C, non-condensing;

Mains supply voltage range up to ±10 % of the nominal voltage

Up to the levels of Overvoltage Category II;

Up to Pollution Degree 2;