PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20, you can fill out the form below to connect with us.

Benefits of PA6 ABS GF20

Flame retardant pa material

Semi crystalline thermoplastic

Good impact strength and stiffness

Good low temperature performance

Outstanding wear resistance

Good temperature resistance

The degradation of thermal oxidation is reduced

Improved long-term heat and stability to ultraviolet and visible light

PA6 GF20 Application

The automotive industry using PA6 GF20 includes many components, such as automotive dashboard, exterior panel, interior trim panel and steering Panels, soundproof panels, door locks, bumpers and air ducts. In terms of electrical appliances, PA6 GF20 is widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.

In terms of building materials, PA6 GF20 is widely used in packaging, furniture, sports and entertainment products, machinery and instrumentation industries.

Typical Application of PA6 GF20 heat stabilized (A1006D)

Glass fiber 20% PA6 reinforced (25% GF is workable as well) can be used for heat-resistant and high-strength structural parts such as machinery, auto parts, power tools, coil frames, engine covers, etc.

Other Details of PA6 GF20 heat stabilized (A1006D)

Physical Property of PA6 GF20

Ash                     (15.0% 1 ISO3451/1)

Conditioned 600°C*2h

Density (1250Kg/m3 1 ISO1183)

Conditioned 23°C

Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4)

Shrinkage Vertical Flow (0.7-1.1% I ISO294-4)

Mechanical Properties of PA6 GF20

Tensile strength (125.0MPa 1 ISO527)

Conditioned 5mm/ min

Tensile Strain at Break (2.5% I ISO527)

Conditioned 1.0J

Notched Impact Strength (125 0MPa I ISO527)

Conditioned 2mm/min

Flexural Strength (190MPa 1ISO178)

Conditioned 2mm/min

Flexural Modulus (5700 MPa I ISO178)

Conditioned 5mm/ min

Thermal Property of PA6 GF20

Melting Point (220°C I ISO11357)

Hot Deformation Temperature (175*C I ISO75)

Conditioned 1.8MPa

Flammability Class (HB 1UL94)

Conditioned mm

Injection Molding Conditions of PA6 GF20

Drying Temperature 130°C

Drying Time 3h

Cylinder Temperature 240-260°C

Nozzle Temperature 240-260*C

Tooling Temperature 80*C

* Molding conditions are just for reference, please make an adjustment based on the actual situation！

As an engineering plastic company, we can offer sorts of modified plastic for sale, if you have needs, please contact us.