Keying 4 in flap disc including Paint & Striper Disc with a central hole, Paint & Striper Disc with Shank, Paint & Striper with Fibre Backing, Roloc Surface Condition 4 in flap disc, Roloc 4 in flap disc, Self-adhesive 4 in flap disc, Flap 4 in flap disc, Fibre 4 in flap disc, Velcro-backed abrasive disc.

What tools can 4 Inch abraisve discs usually apply with?

-Backing pads

Types Of 4 Inch Flapper Disc

4 Inch Paint & Striper Disc With Central Hole

Paint Stripe Disc With Central Hole 4 inches is used for coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues in peripheral grinding.KEYING Striper Discs...

4 Inch Paint & Striper With Fibre Backing

KEYING Paint Striper Disc With Fibre Backing 4inch can remove general coating and polishing surface, can be used on stainless steel, mild steel, aluminum, plastic, cement, wood and stone surface. It i...

4 Inch Paint & Striper Disc With Shank

Paint Striper Disc with Shank 4 inch is used for coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues in peripheral grinding. Open-cell material prevents...

4 Inch Rust & Striper Disc

Keying 4 inch Abrasive discs inluding Rust & Striper One Hole, Rust & Striper Disc, Rust & Striper With Shank, Roloc Surface Condition Disc Disc, Self-adhesive Disc, Flap Disc, Fibre Disc...

4 Inch Roloc Surface Condition Disc

KEYING manufactures Surface Condition Material (SCM),our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools.They are ...

4 Inch Self-adhesive Disc

Keying 4 inch Abrasive discs inluding Rust & Striper One Hole, Rust & Striper Disc, Rust & Striper With Shank, Roloc Surface Condition Disc Disc, Self-adhesive Disc, Flap Disc, Fibre Disc...

Working Principle of 100mm 4 Inch Flapper Disc

When working with a 100mm 4-inch flapper disc, understanding its working principles is essential for achieving optimal results. Here are key factors to consider:

Reducing Contact Pressure and Speed: To minimize wear and thermal load on the workpiece, it is recommended to reduce the contact pressure and speed. When necessary, the use of abrasive paste or oil can further assist in achieving this objective.

Use Coarse-Grit Abrasive Cloths: Instead of increasing contact pressure to enhance cutting force, choosing abrasive cloths with a coarse grit size can be more effective. This approach reduces tool wear and thermal load, ensuring efficient cutting without unnecessary strain.

Adjust Cutting Speed: A slight increase in cutting speed can result in a finer surface finish. This adjustment allows for better control and precision during the cutting process.

By following these working principles, you can effectively reduce wear and thermal load on the workpiece while optimizing the performance of your 100mm 4-inch flapper disc.

For more information about flap wheel, please feel free to contact us!