• Shangguan Xiang Special Industrial Zone,Fuyang District
  • Hangzhou, Zhejiang,
  • סין
  • תל:86-571-63501868
  • פקס:86-571-63501611
  • כתובת אתר:

hybrid vertical injection molding machine DV-1600S

ציוד מחזור

על פי בקשה

חדש

לא זמין

לא זמין

לשאול

תיאור מוצר

hybrid vertical injection molding machine DV-1600S

If You Have Any Question On Hybrid Vertical Injection Moulding Machine, Hybrid Vertical Injection Molding Machine, We Will Give The Professional Answers To Your Short Questions.

Single Slide Table Style of DV-S Series:

* Vertical four column clamping, vertical injection, ease to put and take out inserts.

* Single slide design, item put and take out of the work area, which shares ease operate, high safety character.

* Four column single slide table machine (1 upper mold, 1 bottom mold)

We are injection molding machine manufacturers.

Specification

Model Unit DV-1200S

(  Injection    Unit  ) Screw diameter mm Ф46 Ф52

Maximum injection pressure Kg/cm2 2193 1716

Theoretical shot volume cm3 365 467

Maximum shot weight(PS) g/Oz 325(11.4) 415(14.6)

Injection rate cm3/sec 123 157

(  Clamping      Unit  )  Clamping force ton 120

Sliding Table size  mm 590×700

Sliding Table Stroke  mm 760

tie bar distance mm 600×400

Minimum mold thickness mm 200/300(Can be customized according to customer requirements)

Opening stroke mm 300

Open daylight mm 500/600(As required)

Ejector force T 4.0(Can be customized according to customer requirements)

Ejector stroke mm 73

(  Others  ) Pump motor power Kw 15

Hydraulic system pressure Kg/cm2 140

Barrel heating power Kw 7

Total wattage Kw 22

Oil tank capacity L 400

Machine weight  (approx.) T 6.8

Machine dimensions(approx.) m 3.5×1.1× 3.6

Specification

Model Unit DV-1600S

(  Injection    Unit  ) Screw diameter mm Ф50 Ф55

Maximum injection pressure Kg/cm2 1856 1534

Theoretical shot volume cm3 471 570

Maximum shot weight(PS) g/Oz 420(14.8) 509(17.9)

Injection rate cm3/sec 157 190

(  Clamping      Unit  )  Clamping force ton 167

Sliding Table size  mm 640× 800

Sliding Table Stroke  mm 800

 tie bar distance mm 660× 630

Minimum mold thickness mm 250/350(Can be customized according to customer requirements)

Opening stroke mm 300

Open daylight mm 550/650(As required)

Ejector force T 4.0(Can be customized according to customer requirements)

Ejector stroke mm 115

(  Others  ) Pump motor power Kw 18.5

Hydraulic system pressure Kg/cm2 140

Barrel heating power Kw 10.8

Total wattage Kw 29.3

Oil tank capacity L 650

Machine weight  (approx.) T 7.5

Machine dimensions(approx.) m 3.9×1.7× 4.5