SER—V Series UV Resistant HFFR TPU（105/℃ 80℃Heat-Resistance）

Applied Fields:

HFFR wire & cable with stable, long-term UV resistance property can pass UL105 /90 ℃ ℃ heat-resistance level.

Characteristics:

1. UV resistance property: long-term, stable UV resistance property, E △ ＜1（0.35W/m2, 340nm, 4H/60 &4H/50 ℃ ℃, 48h/168h）after 48h/168h radiation;

2. Heat-resistance Level: 105/80℃;

3. Flame Retardant Level: 1.5mm V0, support VW-1;

4. Physical characteristics: can support wire & cable to pass UL 1581/758/62 test and non-migration test;

5.Surface effect: fine and smooth surface and soft-touch feel without heterogeneous, pits, whiten, sticky and etc. defects can return gloss, matte and semi-matte surface effect through control of die temperature.

Technical Data of UV-resisitance TPU

Technical Data Sheet Model

Material Properties Test Standard Test Condition Unit 1185D-EMS-1186S

General Characteristics Material Category - - -

Appearance (Light/Semi-matte/Frosted) - - -

Extrusion/Injection - - -

Physical Characteristics Hardness ISO 48 15S Shore A 82

Proportion ISO 1183 - g/cm³ 1.263

Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 10.5

Brittle Temperature ISO 812 - ℃

Mechanical Properties Elongation ISO37:2017 200mm/min % 442

Tensile Strength ISO37:2017 200mm/min Mpa 24.9

Tearing Strength ISO34-1:2015 500mm/min KN/m

Hot Air Aging Elongation Retention Rate ISO37:2017 - %

Tensile Strength Retention Rate ISO37:2017 - %

Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm

Permittivity ASTM D150 - -

Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm -

Oxygen Index ASTM D2863 - %

Feature

Is tpu uv resistant? The answer is yes, if you want to know more questions about tpu materials, please visit our website.

Select the best polymer compounds solutions, there is always one for your application. ATP polymer compound manufacturer's main thermoplastic polyester elastomer products are TPU, TPEs, LSZH, XLPE, etc. Widely used in: new energy vehicles, medical equipment, robots, 5G, etc.